Irrigatia.ca - Store

Description Weather responsive SMART Solar Automatic watering system - the kit includes the C24 SMART controller with integrated pump, inlet filter, anti-siphon, water level sensor (with 5m cable), 15m tube, 12 drippers, stakes, tees, 3 x AA rechargeable batteries

(batteries are preinstalled - please remove & charge the batteries externally for 20 – 30 minutes before 1st use as they may be flat). .

The latest addition to the Irrigatia range, the SOL-C120 waters up to a massive 120 Irrigation Units (IU's). The kit includes a C120 SMART controller with integrated irrigation pump as well as a secondary pump for mixing plant feed in-line during the watering process.C120 controller with main pump and secondary feed pump, water level sensor, C120 Solar Panel with 5m lead, 1 x inline filter + 2 x 13mm adaptors, 1 x foot strainer, 1 x 25m roll of 13mm tube, 1 x 2.5m 3.5mm tube and inlet filter,1 x 4mm punch, 12 x 4mm joiners, 2 x 13mm t piece, 4 x 13mm end plug, 4 x 13mm elbow, 10 x 13mm stakes, 6 x 13mm clamps, 2 x 13mm Valves, 12 x 4mm valves, battery pack containing 10 x AA rechargeable batteries

The Vertical Fruit & Veg Garden comes with 4 small pots, 2 medium and 2 large pots ideal for growing different fruit and vegetable plants.

The kit comes with 4 x 600mm support rails that you screw directly on to a wall, fence or shed at whatever height you require.

The drainage trough is hung on the bottom rail to collect any excess water which can be easily recycled.

The kit comes with its own drippers and tap connector so you can connect directly to a tap or timer - alternatively if you want watering to respond to the weather conditions use with an Irrigatia solar watering kit.

The Vertical Herb & Flower Garden comes 12 small pots, ideal for growing a variety of herbs and flowers.

The kit comes with 4 x 600mm support rails that you screw directly on to a wall, fence or shed at whatever height you require.

The drainage trough is hung on the bottom rail to collect any excess water which can be easily recycled.

The kit comes with its own drippers and tap connector so you can connect directly to a tap or timer - alternatively if you want watering to respond to the weather conditions use with an Irrigatia solar watering kit.

Dripper extension kit for use with SOL-K12 and C12 – includes 15m tube, 12 each drippers, stakes, t pieces

Seep hose extension kit (sometimes called soaker hose or leaky hose) – contains 12m seep hose, 12 stoppers, 2 connectors, 12 stakes. To be used in conjunction with an Irrigatia Solar Automatic Watering System. Up to 1 metre of seep hose can be pushed onto the drippers supplied with the main unit. A stopper should be put in the other end and stakes can be used to hold it in position. This arrangement can be used to spread water over a larger area than the dripper alone

Tube extension kit for use with all pumps, includes 30m tube

Tube extension kit for use with all pumps, includes 15m tube

Ideal for small to medium gardens or allotments. Waters up to 25m of veg patch or flower beds. Durable heavy duty Micro-Porous Hose with Dupont™ Tyvek® internal core and protective jacket. Includes 25m Micro-Porous Hose, 2 adaptors, 2 Connectors, 2 lengths connector pipe, 2 O rings, 2 cable ties, 6 stakes.

Micro-Porous Hose Connector Kit - used to sub-divide into more than 2 lengths.

The kit contains: 2 cones. 2 "O" rings, 2 pieces 6mm tube, 6 stakes, 2 straight through connectors, 4 cable ties.

Don't have a Rain Barrel - then you need the Irrigatia Reservoir. Simply connect the Irrigatia Reservoir to a tap and insert the inlet tube & filter from the SMART Solar controller (not included) into the Reservoir - it automatically refills from the tap - installs in a few minutes. The kit comprises the 5 litre capacity container, float valve to control the refill, hose connector and clip.

Irrigatia introduces a unique plant fertilizer system for the SOL range of Solar Powered Drip Irrigation Systems

Liquid fertilizer is delivered automatically to your plants providing the water and nutrients they require to be able to thrive.

Moisture level sensor - for use with C Series controllers only fitted with IRR-SPV2 pumps (2015 onwards)

This unit comprises a self install PCB that sits inside the controller case and is attached to the main PCB. The moisture sensor has a 5m cable - the sensor is intended to stop the irrigation is there is already sufficient water in the soil. It can be switched from wet to medium to dry if required, but it is recommended to start with the wet setting.

It is important to position the sensor correctly as if it is too close to the dripper it will lead to very short pumping times.

Needs to be connected inline to the pump outlet when watering anything that is below the water source.

Syringe - used to help clear blocked drippers and to restart the pump after winter storage.

Drippers for use with Irrigatia Solar Automatic Watering systems.

Used to connect irrigatia 4mm tube together

A stopper that can be plugged into the Irrigatia 4mm tube to terminate a line.

Allows easy connect/disconnect of standard Irrigatia tubing

4mm straight connector. Used to connect standard Irrigatia tubes and as a nipple to connect dripper or microporous hose extension kits to the 13mm tank series backbone tube.

4mm valve for use with standard Irrigatia tube

Spare inlet filter for use with all Irrigatia Solar Automatic Watering systems.

Replacement pump for 2016 onward C series units.

Replacement Diaphragm Pump for SOL-K12 and SOL-K24 models

Replacement Pump connector for use with K12 and K24 pumps

Replacement Pump connector for use with C12 and C24 pumps

Replaces I/O connector for SPV2 pumps only.

Replacement water level sensor for SOL-C24

Solar panel for SOL-C24

Replacement rear case panel

3 "AA" 1.2 V 1200 mAh Batteries for all Irrigatia pumps